626.581.1777 | PROSHOP@KWAUSA.COM

VM4 Ronin 10 SBR

THE FIRST LINE OF MODULAR AEGS

Meet the all-new the AEG 2.5 VM4 Ronin 10 SBR, part of the Ronin M-Series. A new line of modular AEG rifles, the first airsoft rifles to hit the market specifically designed to provide an interchangeable family of products. The Ronin M-Series will have multiple variations for specific player needs and tastes, and is engineered with KWA’s latest AEG 2.5 & AEG 3 gearboxes to combine the industry’s most reliable systems with more aggressive designs.

The Ronin 10 Short Barreled Rifle features a monolithic-look in a MK18 length. All Ronin M-Series rifles come with new custom, sleek, lightweight rails capped off with aggressive lines at the very front — plus a new-look mock suppressor to cover the 10.3″ outer barrel. The sleek, lightweight aluminum rail design also helps provide comfort and stability as you adjust your FPS from 390-430 with the AEG 2.5 system (Range is adjustable with different springs!). Highlighted by a Switch Life Extender to minimize the wear and tear on trigger contacts, the AEG 2.5 provides Milsim & Field players the ultimate AEG rifle to outlast the competition. Additional new features include magazine cutoff compatibility combined with adjustable FPS for users to customize their KWA AEG rifle to their own specifications with the new VPS tool (included in every box).

Best of all, AEG Ronin models feature modular upper receivers. You can swap full upper receivers with any AEG 2.5 or AEG 3 rifle to create the perfect AEG rifle. Airsofters can put the Ronin Recon ML (MLOK-compatible) upper receiver on the Ronin PDW lower receiver and enjoy an aggressive front end with a tanker-style stock.

AEG 2.5 RONIN 10 SBR features:

  • Custom-designed, lightweight rail (new)
  • Improved high-torque motor (new)
  • Ambidextrous fire selector (new)
  • Enlarged trigger guard (new)
  • Custom mock suppressor (new)
  • Full aluminum rail (new)
  • Front & rear PTS® Enhanced Polymer flip-up sights
  • Rear-wired battery compartment
  • Switch Life Extender to prevent contact burnout
  • Fully adjustable FPS through stock with included quick change tool
  • 30/120rd. magazine cut off compatibility
  • PTS® Enhanced Polymer Grip
  • Rotary hop up
  • One-piece upper receiver
  • Upgraded high-speed gear set (new)

SWITCH LIFE EXTENDER

THE NEW GENERATION: AEG 2.5 & AEG 3

Get more pew pew out of your new KWA AEG 2.5/3 with the new Switch Life Extender, included on all new gen AEGs. The SLE will extend the life of your trigger contacts by almost 500% by absorbing 99.9% of the back current/power surge that cause their shuttle contacts to burn out.

Unlike other electrical aftermarket add-ons, the SLE doesn’t rely on complicated circuit boards or cause erratic trigger behavior. Combined with numerous internal upgrades like the adjustable fps, the new gen of KWA AEGs is the new standard.

For reference only. Not to scale. Motor is shown upside down for illustrative purposes.
KWA SLE Diagram
Weight9 lbs
Dimensions45 x 10.25 x 3.75 in

PRODUCT SPECS

– Length Retracted: 717.55mm
– Length Extended: 800.1mm
– Outer Barrel Length: 171.45mm
– Inner Barrel Length: 314.32mm
– Inner Barrel Diameter: 6.05mm
– Magazine Capacity: 30/120 Rounds (w/cut off)
– Weight (with mag): 6.6 lbs.
– Rate of Fire: 20+
– Velocity: 390 min- 430 max, adjustable FPS
– Power Source: NiMh or Li-po/Li-Fe

Operator Manual

ADJUSTABLE FPS VIDEO

RONIN Receiver Swap: Video

RONIN Receiver Swap: How-to

Disassembly of Current Upper Receiver:

1. Push front take down pin (part #378) in from left side through the receiver until it stops.
2. Close ejector port cover (part #68) and ensure it remains in the closed position.
3. Retract the charging handle latch (part#269) and hold while simultaneously sliding the upper receiver forward and off of the lower receiver. CAUTION: Always ensure the mock bolt plate (part #M352) lays securely against the mechbox during entire disassembly and reassembly.

Reassembly of Current Upper Receiver:
1. With the mock bolt plate held securely against the mechbox and the ejector port cover is in the closed position, pull the bolt catch release away from the lower receiver and slide the upper receiver on.
2. Ensure there is no gap between the upper and lower receiver, then reinsert the front take down pin to secure the upper receiver in place.

Diagram

Ronin RN-10 SBR Diagram

Related Products