Quick answer: if ATP-GT shots curve or drop short, it is the hop-up setting or a dirty barrel first, and gas second. Adjust the tool-less hop-up for your BB weight, clean the inner barrel, and make sure the magazine is warm and filled with the gas it is built for.

Checked against KWA’s GBB maintenance guide<

Check these in order

  1. Hop-up. The ATP-GT has a tool-less hop-up. Adjust it a little at a time until BBs fly flat, then re-tune whenever you change BB weight.
  2. Clean the inner barrel. Residue in the barrel sends BBs sideways. Clean it and check the hop-up bucking; if it is worn, find the ATP-GT bucking on Part Finder & Diagram.
  3. Right gas, right magazine. The NS3 system is built for CO2 and stays compatible with green gas, but CO2 goes only in the ATP-GT CO2 magazine. Green gas goes in the ATP-GT 22-round, ATP 23-round or ATP 48-round magazines.
  4. Weak shots and short range. Warm the magazine, refill it correctly (30 to 40 seconds, both upside down) and put a drop of silicone oil on the main seal.
  5. Still leaking? The I-9 magazine release valve fits the ATP series; the I-8 charging valve is the fill valve.

Parts, manual and diagram

Frequently asked questions

Can I use CO2 in the ATP-GT?

Yes, with the ATP-GT CO2 magazine. Never put CO2 in a green gas magazine.

Why do my ATP-GT BBs curve?

Hop-up setting or a dirty bucking. Adjust the hop-up and clean the barrel.

Which magazines fit the ATP-GT?

The ATP-GT 22-round, the ATP 23-round and 48-round magazines, and the ATP-GT CO2 magazine.

Which oil goes on ATP-GT seals?

Silicone oil only, never petroleum-based lubricants.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop