In stock
Part: 1911 PTP MK I/MK II & 1911A1 Barrel Bushing (#15)
$6.00
This polymer cylinder fits the kz.61 Skorpion, and appears on Skorpion diagram as part 3.
In stock
Part: KZ.61 Skorpion Magazine Catch (#24)
$6.00
This polymer cylinder fits the kz.61 Skorpion, and appears on Skorpion diagram as part 3.
In stock
Part: PTS Radian Model 1 Bolt Catch SP (#42)
$6.00
Spring that goes under the bolt catch on the RADIAN MODEL 1 to keep the bolt catch in proper position when not activated.
In stock
Part: PTS Radian Model 1 Hex screw (#1392)
$6.00
Small Hex screw that is partially responsible for securing the valve knocker assembly.
In stock
Part: PTS Radian Model 1 Bolt Release Plunger (#1381)
$6.00
Plunger responsible for pushing AXTS lever (right side bolt release) outward away from the gun
In stock
Part: AEG Gas Piston Plug (#437)
$6.00
This replacement part is displayed as part number 437 on TK45/TK45C/T10 diagram
In stock
Part: AEG Gas Piston (#478)
$6.00
This replacement part is displayed as part number 478 on TK45/T6 diagram
In stock
Part: AEG Gas Piston Operating Rod (#477)
$6.00
This replacement part is displayed as part number 477 on TK45/TK45C/T6/T10 diagram
In stock
Part: PTS Gas Magazine Lip (#MG002)
$6.00
This magazine lip is designed to replace the magazine lip for the PTS Masada GBB and the Radian Model 1 (GBB). Please note that this...
In stock
Part: LM4 PTR Series Magazine Follower (#MG226)
$6.00
This polymer magazine follower fits the LM4 Series magazines, but does not fit the LM4 Magpul version magazine, which can be found here. This follower...
In stock
E-24 AKG Main Seal (Part 86,523)
$6.00
This rubber seal fits all AKG rifles and acts as the primary compression piece inside of the receiver. Occasional replacement can restore compression and overall...
In stock
D-5 Main Seal Base (Part 48, 47, 37)
$6.00
The D-5 aluminum main seal base fits several KWA pistols and appears on diagrams as M226 part 48, M1911 MK Series part 47, and kz.75...
In stock
Part: M1911 MK Series Magazine Base Bumper for 21 Round Magazines (#120-1)
$6.00
This polymer bumper sits at the base of the 21 round M1911 magazines, and appears on the M1911 magazine diagram as part 120.
In stock
Part: LM4 Series Inner Barrel Stabilizer (#40)
$6.00
This solid brass piece fits the LM4 Series rifles and appears on diagrams as part 40.
In stock
D-49 Recoil Spring Guide Cap for 1911 MK Series and M1911A1 (Part 55)
$6.00
This metal recoil spring guide cap fits all 1911 MK Series pistols as well as the new M1911A1, 2014 Version. It appears on diagrams as...