In stock
Part: LM4 PTR Bolt Carrier Piston Stop (#36-1)
$4.20
This durable metal piston stop fits into the LM4 PTR bolt carrier. It fits all LM4 PTR models, including the LM4 RIS and LM4C.
In stock
Part: AKG Series Impact Hammer Stop (#58)
$3.90
This replacement part is displayed as number 58 on AKG74M/74SU/KCR diagram
In stock
Part: RM4 and VM4 Series Sector Gear Transfer Cam (#M342)
$3.90
This cam fits the RM4/VM4 Series mechbox and appears on the RM4/VM4 mechbox diagram as part 342.
Only 9 left in stock
Part: M11A1 NS2 Take Down Pin Lock (#51)
$3.90
This polymer take down pin lock fits the M11A1 NS2 and appears on it’s diagram as part 51.
In stock
E-1 Magazine Base Seal (Part 13)
$3.90
This magazine base seal fits multiple KWA pistols and appears on the ATP-LE and ATP-SE magazine diagrams as part 13.
In stock
Part: AKG Series Magazine Base Seal (#MG217)
$3.90
This replacement part is displayed as number 217 on AKG74M/74SU/KCR Magazine diagram
In stock
Part: ATP and ATP Auto Impact Block Reset (#19)
$3.90
This metal impact block reset fits both the ATP and ATP Auto, as well as the original M-Series. It appears on ATP diagrams as part...
In stock
B-25 M1911 Impact Block (Part 35)
$3.90
The B-25 impact block fits the M1911 MK Series, the M1911A1 NS2, and the M1911DS. It appears on the MK Sereis and M1911A1 as part...
In stock
E-8 Magazine Base Seal
$3.90
This rubber magazine seal appears on diagrams as 1st Gen M1911DS magazine part 95
In stock
E-27 Large O-Ring for LM4
$3.90
This rubber O-ring is a direct replacement for all LM4 Series rifles, and fits around the LM4 bolt base, part 60. The ring itself appears as part 191 on LM4 diagrams. Occasional replacement of this part helps restore compression, FPS, and cycling abilities of your KWA LM4. Bolt base sold separately.
In stock
Part: LM4 PTR Magazine Release Valve Block Seal (#MG235)
$3.90
This rubber seal appears as part 235 on the KWA LM4 PTR magazine diagram.
In stock
Part: ATP-SE Right Sear (#29T)
$3.60
This metal sear fits the ATP-SE, the ATP Auto, and the original M Series GBB Pistols that had auto or burst capabilities, such as the...
In stock
Part: ATP-LE Hammer Reset Block (#27)
$3.60
This metal reset block fits the standard ATP and appears on it’s diagram as part 27. Please note that this piece does not fit the...
In stock
Part: ATP-SE Sear: Left (#28T)
$3.60
This sear fits the full auto ATP-SE and appears on it’s diagram as part 28. Please note that this will not fit the standard ATP.
In stock
C-10 Hop Up Tensioner (Part 99, 127)
$3.60Part C-10|Hop-up tensioner|Genuine KWA
- Helps restore hop-up function
- Fits LM4 gas rifles and the kz.61 Skorpion
- KWA Rewards: 1 point per $1 on orders of $50+. How it works
- Free shipping on orders over $200 (contiguous US).