In stock
Part: M9 PTP Safety Lever: Left Side Assembly (#22S)
$13.00
This metal safety lever fits the left side of both the M9 PTP and M9 Tactical PTP, and appears on the M9 diagram as part 22A.
This assembly includes part 7,22,51 and 84.
Only 3 left in stock
In stock
Part: ATP-LE Magazine Base Plate & Bumper (#MG117A)
$12.00
This replacement part is displayed as number 117 on ATP-LE magazine diagram
In stock
Part: LM4 Series Rear Sling Loop (#125)
$12.00
This metal sling loop fits the LM4 Series gas rifles, including the PTR and KR Series. It appears on diagrams as part 125.
In stock
Part: KMP9 Series Magazine Base (#136)
$12.00
This metal magazine base fits the KMP9 Series magazines and appears on the magazine diagram as part 136.
In stock
B-33 1911 MK Series Breech Block (Part 27, 27A)
$12.00
This metal breech block fits all M1911 MK Series pistols and appears on diagrams as part 27.
In stock
Part: KM4 Series BB Feed Ramp (#3)
$12.00
This polymer feed ramp fits all KM4 SR and CQR rifles, as well as the new KM4 KR Series. Screws are not included.
In stock
Part: KM4 Series Buffer Tube Receiver Spacer with Sling Loop (#507)
$12.00
This metal spacer with sling loop fits between the receiver and the buffer tube on the KM4 Series. It appears on respective diagrams as part 83.
In stock
Part: KM4 Series Tappet Plate (#M0051)
$12.00
The KM4 Series tappet plate is made from high strength polymer and will fit all 2GX mechboxes. It appears on the KM4 2GX mechbox diagram as part 51.
In stock
Part: KMP9 and KMP9R Breech Base (#19)
$12.00
This metal breech base fits all KMP9 and KMP9R SMGs and appears on diagrams as part 19.
In stock
Part: LM4 Series Charging Handle (#38)
$12.00
This charging handle fits the LM4 Series and appears on respective diagrams as part 38.
Only 9 left in stock
Part: M226 Cylinder (#7)
$12.00
This polymer cylinder fits the M226 and appears on its diagram as part 7.
In stock
Part: ATP Trigger Transfer Bar (#43)
$11.70
This metal trigger bar fits the standard ATP-LE and ATP-C. nPlease note that this piece will not fit the ATP-SE
In stock
Part: ATP-LE and ATP-SE Hammer Block (#24)
$11.70
This metal hammer block fits both the standard ATP-LE and full auto ATP-SE and appears on both diagrams as part 24.
Out of stock
Part: AEG Magazine Catch (#66)
$11.70
This metal magazine catch fits all KM4 Series, VM4 & RM4 AEG rifles, including the KM4 SR, T6, T10, M10, Q10, VM4A1 and RM4A1. It appears on respective parts diagrams as part 66.