RM4 Ronin RECON ML

THE FIRST LINE OF MODULAR AEGS

Meet the all-new the AEG 3 RM4 Ronin Recon ML, part of the Ronin M-Series. A new line of modular AEG rifles, the first airsoft rifles to hit the market specifically designed to provide an interchangeable family of products. The Ronin M-Series will have multiple variations for specific player needs and tastes, and is engineered with KWA’s latest AEG 2.5 & AEG 3 gearboxes to combine the industry’s most reliable systems with more aggressive designs.

The Ronin Recon ML features a new custom, lightweight, MLOK-compatible rail, lightweight rails capped off with aggressive lines at the very front — plus a new-look mock suppressor to cover the 14.5″ outer barrel. The sleek and aggressive rail design also helps provide comfort and stability as you handle 390-410 of FPS. Highlighted by a Switch Life Extender to minimize the wear and tear on trigger contacts, the AEG 3 provides Milsim & Field players the ultimate AEG rifle.

As with all AEG 3s, the Ronin Recon ML also utilizes the patented KWA Kinetic Feedback System [KFS]. This gives the user felt recoil with every trigger pull. This new KWA AEG3 RM4 also features a mechanical/electrical cut-off system to stop firing when the magazine is empty at 30 and 120 rd. intervals. Standard features of include metal alloy receivers, MilSpec buffer tube and stock, an MLOK-compatible rail which allows operators to customize their weapon configuration. Best of all, AEG Ronin models feature modular upper receivers. You can swap full upper receivers with any AEG 2.5 or AEG 3 rifle to create the perfect AEG rifle. Airsofters can put the Ronin Recon ML (MLOK-compatible) upper receiver on the Ronin PDW lower receiver and enjoy an aggressive front end with a tanker-style stock.

AEG 3 RONIN RECON ML features:

  • Custom-designed, lightweight, MLOK-compatible rail (new)
  • MLOK rail adapters included in every box (new)
  • Improved high-torque motor (new)
  • Ambidextrous fire selector (new)
  • Enlarged trigger guard (new)
  • Custom mock suppressor (new)
  • Front & rear PTS® Enhanced Polymer flip-up sights
  • Rear-wired battery compartment
  • Switch Life Extender to prevent contact burnout
  • 30/120rd. magazine cut off compatibility
  • PTS® Enhanced Polymer Grip
  • Rotary hop up
  • One-piece upper receiver
  • Upgraded high-speed gear set (new)

SWITCH LIFE EXTENDER

THE NEW GENERATION: AEG 2.5 & AEG 3

Get more pew pew out of your new KWA AEG 2.5/3 with the new Switch Life Extender, included on all new gen AEGs. The SLE will extend the life of your trigger contacts by almost 500% by absorbing 99.9% of the back current/power surge that cause their shuttle contacts to burn out.

Unlike other electrical aftermarket add-ons, the SLE doesn’t rely on complicated circuit boards or cause erratic trigger behavior. Combined with numerous internal upgrades like the adjustable fps, the new gen of KWA AEGs is the new standard.

For reference only. Not to scale. Motor is shown upside down for illustrative purposes.
KWA SLE Diagram
Weight9.0 lbs
Dimensions45 x 10.25 x 3.75 in

PRODUCT SPECS

– Length Retracted: 819.15mm
– Length Extended: 895.35mm
– Outer Barrel Length: 381mm
– Inner Barrel Length: 419.92mm
– Inner Barrel Diameter: 6.05mm
– Magazine Capacity: 30/120 Rounds (w/cut off)
– Weight (with mag): 7.3 lbs.
– Rate of Fire: 20+
– Velocity: 390 – 410 FPS
– Power Source: NiMh or Li-po/Li-Fe

RONIN Receiver Swap: Video

RONIN Receiver Swap: How-to

Disassembly of Current Upper Receiver:

1. Push front take down pin (part #378) in from left side through the receiver until it stops.
2. Close ejector port cover (part #68) and ensure it remains in the closed position.
3. Retract the charging handle latch (part#269) and hold while simultaneously sliding the upper receiver forward and off of the lower receiver. CAUTION: Always ensure the mock bolt plate (part #M352) lays securely against the mechbox during entire disassembly and reassembly.

Reassembly of Current Upper Receiver:
1. With the mock bolt plate held securely against the mechbox and the ejector port cover is in the closed position, pull the bolt catch release away from the lower receiver and slide the upper receiver on.
2. Ensure there is no gap between the upper and lower receiver, then reinsert the front take down pin to secure the upper receiver in place.

In stock

In stock

Our offers

Related Products